|
|
|
|
| |
|
|
|
|
| |
제품특징
RK8511,RK8512 Electronic load
Product introduction
The RK85 series is a new generation of DC electronic load designed and manufactured by MeiRuike Electronic company,use the high performance chip,high speed,high precision design,(the basic accuracy for 0.3%,basic current rising speed for 2.5A/us),Novel appearance,scientific and strict production process,compared with similar products,it is more cost-effective.
Application area
Constant pressure source test,load regulation rate of constant pressure source,current limiting characteristic,loop response characteristic.
Constant current source test,load regulation characteristics of constant current source, transient response.
Battery test,battery life and the characteristics of V/I,internal resistance test,DC-DC emulation of UPS backup battery.
Fuel cell test,output impedance,power density and so on.
Photovoltaic cell test,the characteristics of V/I,the maximum power point,the internal impedance,the efficiency parameter and so on.
Charger test,battery characteristic simulation.
Power transformer,simulated constant load.
Other applications,diverter,circuit breakers,constant current control
Performance characteristics
High brightness VFD display screen,display clear.
The circuit parameters are corrected by software and the work is stable and reliable without the use of adjustable resistance.
Over current,over voltage,over power,over heat,reverse polarity protection.
Intelligent fan system,can change according to the temperature,start or stop automatically, and adjust the wind speed.
Support external trigger input,cooperate with external equipment,complete automatic detection.
After the test is completed,the trigger signal can be output to the external device.
The output terminal of the current waveform can be provided,and the current waveform can be observed through the external oscilloscope.
Support remote port voltage compensating input terminal.
Support multiple test functions
|
|
|
|
|
| |
|
|
| |
|
제품사양 Model | RK8511 | RK8512 | Input | Voltage | 150V | Current | 30A | 60A | Power | 150W | 300W | Constant voltage mode | Range | 0～20V | 0～150V | 0～20V | 0～150V | Resolution | 1mV | 10mV | 1mV | 10mV | Accuracy | 0.3%+0.5%FS | Constant current mode | Range | 0～3A | 0～30A | 0～6A | 0～60A | Resolution | 0.1mA | 1mA | 0.1mA | 1mA | Accuracy | 0.3%+0.5%FS | Constant power mode(≥10% Full scale) | Range | 0～150V | 0～300V | Resolution | 10mW | Accuracy | 0.2%+0.2%FS | Constant resistance mode(≥10% Full scale) | Range | 0～10KΩ | Resolution | 0.01Ω | Accuracy | 0.2%+0.2%FS | Exterior dimension | 380mm×267mm×110mm | Weight | 4kg | 5kg | Accessory | Power supply line |
|
 |
|
| | |
|
