|
|
|
|
AFFRI PIXEL ÈÞ´ë¿ë ¾ÐÀÔ½Ä °æµµ°è |
|
|
• Portable Hardness testers conform to standards DIN 50157 and ASTM E110
• Easy to use: push and read, 5 second only for one test cycle
• Hardness testers equipped with an advanced calibrated dynamometric load cell. Load application as bench top hardness testers.
• Accurate measurements on very thin metal thickness sheets > 0.06 mm and on coating chromium surface, rolled steel, profiles etc.
• Diamond indenter protected for long measurement cycle tests
• MKII and PIXEL: LCD graphic display for multi scale vision, simultaneous conversion on many scales, tolerance setting, statistic, depth indentation thickness, complete statistic, histogram, temperature value. Large hard disk for data and test sessions storage.
• MKII: RS 232 C Output for printer (as option USB 2 is available)
ACTION
Simply choose the desired hardness scale, put the test probe on the surface and apply a light pressure to start the entire test cycle.
|
|
|
|
|
|
|
|
FORCE RANGE
|
|
|
|
Preload:
|
9.807 N (1 kgf
|
METALTEST / PIXEL:
|
54.92 N (5.6 kgf)
|
DM8A - Vickers/Knoop:
|
0.049 - 0.098 - 0.2452 - 0.4903 - 0.9807 - 1.9613
|
MKII:
|
19.614 or 54.92 N (2 or 5.6 kgf)
|
¡¡
|
¡¡
|
FEASIBLE TESTS
|
|
|
|
Rockwell HRA (20...92); HRB (26...100); HRC (0...80); HR15N (69...93); HR30T (16...83)
|
Brinell HB5 (5...205); HB30 (66...884)
|
Vickers (13...1865)
|
Knoop (25...97)
|
¡¡
|
¡¡
|
OPTIONAL TESTS
|
¡¡
|
|
¡¡
|
Tensile Module R (226.. .2898); HZA (0...250)
|
Webster B 0 / 20 (on request)
|
Barcol 0 / 100 (on request)
|
Leeb unit (on request)
|
|
|
TECHNICAL DATA
|
|
|
|
Conformity Standards:
|
DIN 50157 / ASTM E110
|
Accuracy:
|
Better than 1 %
|
Readout Division:
|
0.1
|
Min thickness measurable:
|
0,06 mm at 2 kgf / 0,08 mm at 5,6 kgf
|
Temperature Range:
|
From 10 ¡ÆC to 35 ¡ÆC
|
Power Supply:
|
METALTEST: Battery 9v - MKII
|
PIXEL: Rechargeable battery 6V
|
Software:
|
Affri - OMAG
|
Principle of Operation:
|
Dynamometric load cell
|
Fields Of Use
|
Tests in laboratory or in loco on tubes, profiles, valves
|
bulky or small pieces. For all metals: iron, steel
|
tempered steel, cast iron, brass, aluminium,
|
copper and metal alloys. Heat treatment, hardening
|
nitriding, cementation and hardfacing
|
Hard and soft plastics. Ceramic and glass materials
|
Packing:
|
METALTEST: 6kg, 20 x 30 x 20 cm
|
MKII / PIXEL: 5kg, 50 x 40 x 20 cm
|
|
|
|
| |
|