|
|
|
|
| |
|
|
| AFFRI RSDMAG D2 휴대용 로크웰 경도계 |
|
| |
• The first real standardized portable hardness tester conform to the Rockwell and Brinell standards ASTM E-18, ASMT E-10 and ISO 6508, ISO 6506
• Achieves the highest level of measurement of depth accuracy and resolution available for a Hardness test
• Constant high repeatability and accuracy in every test condition
• RSD MAG is equipped with an advanced calibrated load cell static system for multi load force
• The AFFRI RSD MAG has no limits on samples geometry and largeness
• It is completely uninfluenced by direction so that it is operative up to 360° positioning and is not affected by any external source of vibration
• Self-aligning on round and flat surfaces
• Secure stability on every test piece
• LCD graphic display for multi scale vision, simultaneous conversion on many scales, tolerance setting, statistic, temperature measure, depth indentation thickness, complete statistic, histogram, memory data
• RS 232 C Output for printer (as option USB 2 is available)
• Are available indenters of various length to test every test area and different clamping system
|
|
|
|
|
| |
|
|
| |
|
|
FORCE RANGE
|
|
|
|
|
RSDMAG D4
|
RSDMAG D2
|
|
|
|
|
Preload:
|
29.42 N (3 kgf)
|
98.07N (10 kgf)
|
|
Rockwell:
|
---
|
588.4 - 980.7 - 1471 N (60 - 100 - 150 kgf)
|
|
Superficial Rockwell:
|
147.1 - 294.2 - 441.3 N (15 - 30 - 45 kgf)
|
--
|
|
Brinell:
|
153.2 - 294.2 - 306.5 N
|
98.07 - 612.9 - 1226 - 1839 N
|
|
(15.625 - 30 - 31.25 kgf)
|
as option 2452 N (10 - 62.5 - 125 -
|
|
|
187.5 kgf - as option 250 kgf)
|
|
Vickers/Knoop:
|
29.42 - 147.1 - 294.2 N (3 - 15 - 30 kgf)
|
98.07 - 588.4 - 980.7 N (10 - 60 - 100 kgf)
|
|
|
|
|
FEASIBLE TESTS
|
|
|
|
RSDMAG D4
|
RSDMAG D2
|
|
|
|
|
Rockwall:
|
---
|
HRA - HRB - HRC - HRD - HRF
|
|
HRG - HRL - HRM - HRR
|
|
Superficial Rockwell:
|
HR15N - HR30N - HR45N - HR15T - HR30T
|
---
|
|
HR45T - HR15W - HR30W - HR45W
|
|
HR15X - HR30X - HR15Y - HR30Y - HR45Y
|
|
Brinel HBWT:
|
1/30 - 2.5/15.6 - 2.5/31.5
|
5/125(3) (Aluminum and its alloys) - 2.5/62.5(2)
|
|
(Aluminum and its alloys) - 2.5/187.5(6)
|
|
(Aluminum and its alloys) 2.5/187.5(5)
|
|
(Carbon steel) 2.5/187.5(1) (Cast iron)
|
|
Vickers/Knoop:
|
Generate indentation HV3 - HV15 - HV30
|
Generate indentation HV10 - HV60 - HV100
|
|
Temperature:
|
Measure test temperature range from
|
Measure test temperature range from
|
|
40.0 to + 80.0 °C
|
40.0 to + 80.0 °C
|
|
|
|
|
|
|
TECHNICAL DATA
|
|
|
|
Conformity Standards:
|
EN-ISO 6506-2 / EN-ISO 6507-2 / EN-ISO 6508-2
|
|
ASTM-E10 / ASTM-E18 / ASTM-E103 / ASTM-E384 / JIS
|
|
Accuracy:
|
Better than 0.5 %
|
|
Readout Division:
|
0.1 HR / HBWT
|
|
Indenter Stroke:
|
50mm / 2”
|
|
Temperature Range:
|
From 10 °C to 35 °C
|
|
Power Supply
|
RS 232 C (USB as option) - Battery 6 V + Charger
|
|
- Data Output
|
|
Software:
|
Affri - OMAG
|
|
Principle of Operation:
|
Dynamometric Load Cell
|
|
Fields Of Use
|
Tests in laboratory or in loco on tubes, profiles, valves bulky or small pieces
|
|
For all metals: iron, steel, tempered steel, cast iron, brass, aluminium, copper and
|
|
metal alloys with a more than 0.6 mm thickness
|
|
Heat treatment, hardening, nitriding, cementation and
|
|
hardfacing with less than 0.6 mm depth (RSD MAG D4).
|
|
Packing:
|
50 x 40 x 60 cm / 20 x 18 x 23" - 35kg
|
|
 |
|
| | |
|
